Protect your Wooden shutters with our sturdy Aluminum Shutter caps. These caps give your shutters a nice clean look and extends the life of your shutters. Wooden shutters can fail if moisture gets into the joints of the shutters. This aluminum cap will keep the top of your shutters dry by keeping moisture out of the joint at the top of your shutter where your shutter is most exposed. Shutter Caps will keep your shutters in good shape for years to come. Can be used with any wooden shutters measuring 1" to 1-3/16" thick. Available for shutter widths, from 12" to 22" wide. Shutter cap fits all wooden shutters sold on this site. Sold by the Pair.
Aluminum is a material well-suited for most exterior climates. It is strong and durable along with being rust and corrosive resistant.
- Choose Satin Dark Bronze or Bright Brass finish
- Made from solid Aluminum with an top coat
- Designed to fit 1" to 1-3/16" thick shutters
- Shutter Cap Widths: 12", 14", 16", 18", 20", 22"
- 1/2" lip on both front and back for added protection
- Easy install with clear silicone
- Sold by the pair, one set per window
Installation of Shutter Cap: Make sure shutter cap and shutter are dry and there is no loose paint chips on shutter. Shutter should be primed and painted with an exterior grade product. Add clear exterior silicone caulk to underside of shutter cap and press down on top of shutter, centering the cap on the shutter. Allow exterior silicone caulk to dry before hanging shutters on house.
1 Review Hide Reviews Show Reviews
-
Shutter caps
Depth of cap is too large for the normal 1” shutter. Filled the gap with wood stirrer. The material can be cut easily to fit the width of the shutter. With a little scuffing of the cap, material can be easily painted. Overall, I like the product and would recommend it for protecting wood shutters from moisture seepage into top joints. Strongly recommend re-engineering for smaller depth of cap.
