Product Description
S2S1E (surfaced 2 sides and 1 edge) Hardwoods are for the woodworker as the boards are partially dressed. Boards are “skip” surfaced on both faces with 1 edge clean-ripped. Skip surfaced cleans up most of the roughness to the board, but there could be an occasional rough patch on the faces of boards. Additional dressing and planning of the boards may be needed to complete your project. Since one edge is left rough, please allow a 1” variance in the width of the board.
These boards are graded FAS (First and Seconds) on the one side which can allow an occasional pin knot and small defect on the good side. The back side can have a few knots, wane and other minor defects. There can be an occasional end check (small crack at end of board). This species has a tendency to slightly bend and warp more than other species. We recommend purchasing board a little longer than project needs to accommodate clean up cut at job site.
Poplar is a very common utility hardwood in the US. Its sapwood is white, sometimes with stripes; the heartwood is usually tan, but can range from greenish brown to dark green, purple, black, and yellow. The wood is straight grained, uniform in texture and light weight.
If you would like a more finished board, please see our S4S Hardwoods.
