PSA 3M Peel and Stick Wood Veneer Sheets. Wood veneer in many species. Veneer has 10 mil peal & stick adhesive back. Comes in three sizes. All veneers are unfinished. Abbreviations; R/C-Rift Cut, P/S-Plain Sliced, Qtr.-Quarter, Fig.-Figured.
Both surfaces must be clean, dry and free of oil or wax. Any painted surfaces must be scarified or roughed up with a rough sandpaper before adhesive is applied. Temperature for adhering must be above 65 degrees fahrenheit for at least 24 hours before and after application to ensure proper bonding and drying. Apply contact cement on both dry clean surfaces. Allow both surfaces to dry 30 to 40 minutes before joining, depending on temperature and humidity in room. Contact cement should be tacky and appear glossy. Contact cement bonds immediately upon contact, so caution should be used to align surfaces properly. A use of a dowel rods can be used to separate surfaces to assist during alignment process. After surfaces are joined, pressure can be applied to surface starting in center and working out to edges. No clamping is required.
Posted by Unknown on 5th Mar 2016
Because I have not used it yet, I gave you a 4 star but it looks great.
Posted by Tom Diehl on 19th Feb 2016
Restoring my Mother's Lane cedar chest made in 1938. This was my first time working with veneer, I found an instructional video on You Tube. The ease of cutting and self stick feature made it easy. Takes stain and varnish well. Now that I'm retired, I'm looking forward to more projects like this. Ordered late Monday, on my doorstep Thursday, and that's normal shipping.